How To Apply
STEP 1: CLEAN THE SURFACE
Clean the surface with rubbing alcohol or warm soapy water and allow it to dry completely. Do not use Windex or other glass cleaners, as they can leave a residue that prevents the decal from sticking properly.
Applying to one of our wooden surfaces? Skip this step.
STEP 2: PREPARE THE DECAL
Before removing the backing, firmly rub over the entire decal with a credit card or squeegee. This helps the decal adhere to the transfer tape and removes any air bubbles.
STEP 3: REMOVE THE BACKING
Slowly peel away the white paper backing. If any part of the decal stays on the backing paper, lay it back down, rub firmly again, and try peeling once more.
STEP 4: APPLY THE DECAL
Carefully position the decal on your surface. Starting from one side, smooth it down with a credit card, working across the decal
to remove any air bubbles. For best results, leave the transfer tape in place for 24 hours before removing it.
STEP 5: REMOVE THE TRANSFER TAPE
Slowly peel the clear transfer tape away at an angle. If any part of the decal lifts, stop immediately, press it back down firmly, wait a little longer if possible, and try again.
Description
What's Included
Shipping
Reviews
FAQ